Weight Transmitter (WT)-10N & 10D

Weight transmitters are used in production areas which can be found mainly in the process industry. These weight devices with indication display are connected with PLC. The weight transmitters offered by ‘LCS’ are suitable to connect 1 -6 loadcell thru a Junction Box to the device.

Suitable Applications

TECHNICAL SPECIFICATIONS

DISPLAY : 5 digit bright red color LED display

A/D CONVERTER : Internal 20-bit, External 16-bit resolution

CONVERSION RATE : 10 Samples/Sec

LOADCELLS : Drives 6 Load cells of 350 Ω

POWER SUPPLY : 24V DC/1.5 A, Power Consumption : 13 watts max

DIMENSION : DIN STD 48 x 96 mm, Depth-122 mm Panel cutout 45 x 92 mm

MODELWT-10NWT-10D
ANALOG OUTPUT0- 5V/0-10V, 0 -20mA
1- 5V/2-10V, 4-20mA
0- 5V/0-10V, 0 -20mA
1- 5V/2-10V, 4-20mA
SERIAL PORTSRS232 /
RS485 (Half Duplex
RS232 /
RS485 (Half Duplex)
PROTOCOLSMODBUS RTU/ASCII/ LCS Request/DumpMODBUS RTU/ASCII/ LCS Request/Dump
DIGITAL INPUT2 INPUTS
High logic (5-24V DC)
DIGITAL OUTPUT2 OUTPUTS Potential free contact (24V DC / lA)

Weight Transmitter -HS

High Speed ADC is controlled by 8-bit PIC microcontroller to accurately measure the load and for rapid acquisition of data. The Indicator is user friendly, easy to calibrate and menu driven.

Models and Specification
Indicator Power
Power Supply24V DC Supply/1 AMP
Controller8-bit PIC Controller
A/D Converter
Type24-bit Delta Sigma
Analogue
Input Range
0.2 mV to 25 mV ,
0.2 μV sensitivity
ADC maximum
value
Internal ± 131072 counts ,
1/30,000 display
Resolution1,2,5,10,20,50,
100 selectable (default 5)
Linearity<0.02% FS
Gain Drafting2 PPM/C
Conversion Rate600/1200/2400 sps
selectable (default 600 sps)
Load cell excitation
voltage
5 VDC
Number of loadcell6 load cells of 350 Ω
or 12 load cells of 700 Ω
Display, Keypads
& Inputs
LED Display5 digits 0.56″ Red 7
Segment LED Display
Keypad4 Keys, Menu / Esc Key,
Enter Key / Tare key,
Up Key and Le? Key.
Digital Input1-Isolated digital input
( LOW logic )
Calibration
& Weighing
CalibrationWeights/Sensitivity
Weighing FunctionsAuto Zero, Tare En / Dis
Communication
RS232/RS485 (Two
wire – Half duplex)
Baud rates:
4800 to 115200 bps
selectable (default 9600)
CAN interface
( Peer to peer /
Broadcast
125K to 1000K bauds
selectable (default 250K)